[Crossfire-wiki] [Crossfire DokuWiki] page added: dev:objects
no-reply_wiki at metalforge.org
no-reply_wiki at metalforge.org
Fri Dec 1 05:30:59 CST 2006
A page in your DokuWiki was added or changed. Here are the details:
Date : 2006/12/01 05:30
User : ryo
Edit Summary: created from doc/Developers/objects, first pass
This so far only concerns how to make archetypes,treasure and NPC's
====== How to create new archetypes and bitmaps ======
- Determine if you really need a new archetype. Archetypes are only needed if you are adding new images, or the archetype you are creating will be of general interest. Don't make a new arch if all you really need to do is customize an existing archetype.
- Figure out which directory/category the object will belong to. This will determine the appropriate location for it inside the 'arch' directory. For objects with many animations or that are very large, you may want to make a new subdirectory.
- Create a bitmap. It must be dividable by 32 in both height and width. The file format should be .PNG 256 colour and use transparancy.
- create additional bitmaps if you want animation or directional facing.
- split the bitmaps up into 32x32 bitmaps and named according to the naming.doc conventions in the arch tar package. Note, this is not really necessary at current time - non splitted images should work properly, but some older clients may have problems with it. (you can use the script "splitxbm" which is included below).
- Create an archetype entry. The file should be called object.arc, where object is whatever the new object is. This is by far the most complicated step. First read "crossfire.doc" for an introduction on how to create archetypes.
* Look at other similary archetypes to see how they have been done.
* If you only made one 32x32 bitmap, you will only need one archetype, but if you made a larger bitmap which is cut down to several 32x32 bitmaps, you will need to use "linked" archetypes. To create a linked archetype, add a 'More' line filed by the next piece. The X and Y coordinates in this next piece determine the offset from the head (first) object.
* When making multipart objects, they should be rectangular. Non rectangular may work, but has not been tested. Note that for these multipart objects, in most cases, only the values in the head portion are used (eg, hp, damage, etc for monsters).
* See the section later in this document about animations.
- If your archetype is a creature or NPC you might want to give it abilities such as firebreathing or magical attacks. You put these abilities into the treasures file in the appropriate entry as invisible objects. This is also how you can give inventory like bows or swords as well. Look at the other entries in the treasures file for the format. Note that if an existing entry in the treasures file does what you want, use it for your new archetype. There is no requirement that each archetype has a unique treasure list.
===== What is an archetype and what is an object? =====
Objects are directly derived from archetypes. Everything the player sees in the game is an object. The player never deals with archetypes.
Archetypes are the master objects. All objects have an archetype that they are derived from. When an object is created, the archetype is used for all the default values in the object. When an object is saved, the code
looks at the differences between the archetype and the object it is saving, and only changes the different values.
Archetypes are the entries in the 'arch' directory. The fields for archetypes and objects are generally the same.
Note that by using this archetype model, it means an archetype can get updated and all objects that are derived from it will get updated - this is very useful when new fields are added - the archetypes can get
updated, and all objects in maps, player save files, wherever, get this new value.
====== Things that are alive ======
The name in parentheses after a flag description is the name as it should be used in the archetype file. For example: Attack type (attacktype)
===== Attack Types (attacktype) =====
^ Attack types ^ bit ^ description ^
| Physical | 1 | Basic attacktype. |
| Magic | 2 | All magic spells, but not prayers |
| Fire | 4 | Can ignite objects |
| Electricity | 8 | Can also ignite objects |
| Cold | 16 | Can freeze objects into ice cubes |
| Confusion | 32 | Movement/attack directions become random |
| Acid | 64 | Random equipped item gets -1 to magic attribute |
| Drain | 128 | Victim loses 2% exp, attacker gains half of that |
| Weaponmagic | 256 | Direct damage: Special, use with care |
| Ghosthit | 512 | Attacker dissolves (obsolete) |
| Poison | 1024 | Some damage each turn thereafter |
| Slow | 2048 | Speed is reduced |
| Paralyze | 4096 | Speed is reduced to zero |
| Turn undead | 8192 | Like Fear, but for undead only |
| Fear | 16384 | Like Turn Undead, but for living only |
| Cancellation | 32768 | Removes magic (+/-) from items |
| Depletion | 65536 | Lose one point from one stat (can be restored) |
| Death | 131072 | Chance of instant death, otherwise nothing |
| Chaos | 262144 | None by itself, uses random other types |
| Counterspell | 524288 | Cancels magic spells |
| Godpower | 1048576 | Adds relevant god's attacktype |
| Holy Word | 2097152 | Enemies: X5, Undead: X1 -unless friends, others: none |
| Blind | 4194304 | Blinds victim |
Note that one archetype can have multiple attack types by adding these values together. Thus, something with an attacktype of 65 would attack with both acid and physical.
===== Resistances =====
Creatures can have various resistances. If a creature has a resistance
value for a particular attacktype of 100, it is said to be immune
to that attacktype. The amount of resistance directly reduces
damage. A creature that has 25% resistance to fire only takes 75%
of the damage. A creature 99% resistant only takes 1% of the damage.
A few notes: If a creature/object is immune to magic, then it will be
immune to all damage from that attack, even if that attack type contains
more than just magic.
Otherwise, a creature needs to be immune to all attack types in order
to take no damage (thus, a creature that is immune to physical, but
getting hit by a weapon that does physical and fire would take normal
damage). The attack code goes through all the attacktypes, and
calculates the damage that each will cause. It uses the highest damage
total that any of these attacktypes will use.
For attacktypes that don't deal phyiscal damage but instead effect
the creature in some way (drain, slow, paralyze, etc), the resistance
in general reduces the effect (duration, amount drained, etc).
===== NPC Movement (attack_movement) =====
Set the variable attack_movement to one of the below (cut from define.h):
/******************************************************************************/
/* Monster Movements added by kholland at sunlab.cit.cornell.edu */
/******************************************************************************/
/* if your monsters start acting wierd, mail me */
/******************************************************************************/
/* the following definitions are for the attack_movement variable in monsters */
/* if the attack_variable movement is left out of the monster archetype, or is*/
/* set to zero */
/* the standard mode of movement from previous versions of crossfire will be */
/* used. the upper four bits of movement data are not in effect when the monst*/
/* er has an enemy. these should only be used for non agressive monsters. */
/* to program a monsters movement add the attack movement numbers to the movem*/
/* ment numbers example a monster that moves in a circle until attacked and */
/* then attacks from a distance: */
/* CIRCLE1 = 32 */
/* + DISTATT = 1 */
/* ------------------- */
/* attack_movement = 33 */
/******************************************************************************/
#define DISTATT 1 /* move toward a player if far, but mantain some space, */
/* attack from a distance - good for missile users only */
#define RUNATT 2 /* run but attack if player catches up to object */
#define HITRUN 3 /* run to then hit player then run away cyclicly */
#define WAITATT 4 /* wait for player to approach then hit, move if hit */
#define RUSH 5 /* Rush toward player blindly, similiar to dumb monster */
#define ALLRUN 6 /* always run never attack good for sim. of weak player */
#define DISTHIT 7 /* attack from a distance if hit as recommended by Frank */
#define WAIT2 8 /* monster does not try to move towards player if far */
/* maintains comfortable distance */
#define PETMOVE 16 /* if the upper four bits of attack_movement */
/* are set to this number, the monster follows a player */
/* until the owner calls it back or off */
/* player followed denoted by 0b->owner */
/* the monster will try to attack whatever the player is */
/* attacking, and will continue to do so until the owner */
/* calls off the monster - a key command will be */
/* inserted to do so */
#define CIRCLE1 32 /* if the upper four bits of attack_movement */
/* are set to this number, the monster will move in a */
/* circle until it is attacked, or the enemy field is */
/* set, this is good for non-aggressive monsters and NPC */
#define CIRCLE2 48 /* same as above but a larger circle is used */
#define PACEH 64 /* The Monster will pace back and forth until attacked */
/* this is HORIZONTAL movement */
#define PACEH2 80 /* the monster will pace as above but the length of the */
/* pace area is longer and the monster stops before */
/* changing directions */
/* this is HORIZONTAL movement */
#define RANDO 96 /* the monster will go in a random direction until */
/* it is stopped by an obstacle, then it chooses another */
/* direction. */
#define RANDO2 112 /* constantly move in a different random direction */
#define PACEV 128 /* The Monster will pace back and forth until attacked */
/* this is VERTICAL movement */
#define PACEV2 144 /* the monster will pace as above but the length of the */
/* pace area is longer and the monster stops before */
/* changing directions */
/* this is VERTICAL movement */
#define LO4 15 /* bitmasks for upper and lower 4 bits from 8 bit fields */
#define HI4 240
===== Picking up other items (pick_up) =====
Pick Up specifiers (defined with pick_up)
Nothing 1
Wealth 2
Food 4
Weapon 8
Armour 16
All but those defined 32
All 64
Note also that if can_use_armor, can_use_weapon, can_use_ring,
can_use_wand, can_cast_spell, can_use_bow are set, then the creature
will pick up the matching items even if the pick_up element is not
set to pick up those items.
This only applies to monsters. The player pickup method is much different.
===== Using other objects (will_apply) =====
specifiers will apply this
1 Handles
2 Treasure (chests)
4 Earthwall (tear down)
8 Door (open) */
===== Treasure lists (randomitems) =====
This determines what treasurelist to use for generating the objects
treasures. For archetypes, the default is none, but for other objects
(like those loaded in maps), it will use the same treasure list as
the archetype it descends from unless otherwise specified. In the case
of objects, "none" can be be used to make no items generated.
The format of treasurelists is detailed further down in this file.
Treasure lists are also used to give spell and skill abilities to creatures.
===== Usage of certain flags for monsters =====
==== Damage (dam) ====
Damage determines the amount of damage the creature does. The form this
damage takes it determined by the attacktype the creature has.
When determining damage, a number between 1 and the damage value is
rolled. Thus, even if you have a +6 damage bonus from strength, magic
weapons, etc, a value of 1 could still be generated. Thus, even with very
high magical monsters or very high strength monsters, a low damage roll can
result some of the time.
==== Speed (speed) ====
Speed. A speed of 1.0 means it acts every tick, a speed of 0.1
means it acts every 10 ticks.
==== level (level) ====
==== Int (int) ====
gives monsters a modifying to find hidden/invisible creatures.
==== Pow (pow) ====
If the creature can cast spells, this is how many spell points
are regenerated each move.
==== Con (con) ====
Monsters regenerate this many hit points each move. This is each
time the monster has a move (some for Pow). So two monsters with the
same Con can regenerate at different rates if their speeds are different.
==== Wis (wis) ====
Determines how close a player needs to be before the creature wakes
up. This is done as a square, for reasons of speed. Thus, if the wisdom is
11, any player that moves within the 11x11 square of the monster will wake
the monster up. If the player has stealth, the size of this square is
reduced in half plus 1.
==== Spell points (sp) ====
Number of spell points monster starts with
==== maxsp (maxsp) ====
Maximum spellpoints for monsters
==== flying (flying) ====
set flying to 1 if this can fly.
==== See Invisible (see_invisible) ====
==== See in the dark (can_see_in_dark) ====
==== Spell reflection (reflect_spell) ====
Very powerful, use carefully
==== Pass through (can_pass_thru) ====
==== Kamakaze attacks (one_hit) ====
set to 1 if this creature disapates on attacking (like ghosts)
==== Morale (run_away) ====
==== Use objects (can_use) ====
What objects the creature can use. Note that this has largely been
replaced with the body location information (see further down).
The ones that should in general be used are can_use_shield, can_use_weapon,
and can_use_bow. the others are likely to be obsoleted.
e.g.
can_use_scroll 1
can_use_skill 1
can_use_wand 1
can_use_rod 1
can_cast_spell 1
can_use_bow 1
can_use_armour 1
can_use_weapon 1
can_use_ring 1
==== Resistances (resist_x) ====
The amount of resistance the object has to certain attack types or
environmental effects. Use negative numbers to make onjects more vunerable to
the effects.
e.g
resist_fire 60
resist_cold -30
==== SPECIAL NOTE (IMPORTANT!!!) ====
The fields resist_*, armour, wc and dam can be
set in map files to customize monsters. However, if that monster can
be equipped with items, and actually equips some, these values will
get reset back to those in the clone archetype (normal values.) Thus,
if you want to put a wizard in that does dam 50, make sure can_use_armour,
and can_use_weapon are set back to 0. Otherwise, when items are equipped,
all the above fields will be reset to standard values.
===== Generators and creature spawning (generate) (other_arch) (use_content_on_gen) =====
There are 2 types of generators in crossfire since september 2003.
both are identified as generators by setting the flag "generate" to 1.
For the first type (the classical one) use "other_arch" to specify
archetype of object to be spawned.
The second type allow more fine tuning on what to generate. To activate
second type, set the flag "use_content_on_gen" to 1. Then each
time something must be generated, it will be a copy of a randomly
choosen item in the generator's inventory.
===== NPC's and their life =====
An NPC can have any combination of the following programs (flags):
FLAGS: (They are checked in the following order:)
- sleep (will stand still until woken)
- scared (will run away)
- random_movement (move randomly)
- friendly (will attack enemies of the nearest player)
- unaggressive (don't attack until attacked)
- stand_still (don't ever move)
sleep + (any) = sleep until woken, then do any of the other things...
neutral + random_movement = move randomly around all the time.
neutral (alone) = stand still until attacked, then attack and move.
stand_still + (any) = do anything except moveing
In addition it can have run_away set to which percentage of full
hit-points the npc will run away at.
And then there is the NPC features made by Karl Holland (see attack_movement)
Note that scared creatures will become unscared at some point, so it
is typically not useful to set this in maps or in archetypes.
===== NPC's Speak out =====
The message structure in a monster may contain:
@match <key>|<key>[...]
[text]
[...]
This identifies what the monster will say if talked to with a text that matches
any keys. They keys are processed as primitive regular expressions, so some
characters act as match operators or metacharacters. The asterisk, caret,
square braces, and dollar characters are useful to some degree.
An example of usage:
@match hello|hi
Welcome, good friend!
@match bye
Goodbye!
@match sss
Whasssamatter? You got a lisssp or sssomething?
@match yes
Sssorry, me too.
@match ^no$
You're lucky!
@match *
What did you sssay?
a. Wildcard Character
A key containing only '*' will match anything, but it is not handled in the
same way that regular expressions are normally handled.
If a message does not contain an '@match *', then the first key that contains
an asterisk will be treated as though the key was '*'. In the example below,
if the player says anything, the NPC will say 'Nice tune...' no matter what the
player says, even if it does not end with 'bug'. It will not be possible for
the NPC to say 'Bah, humbug to you!'.
@match hum*
Nice tune...
@match *bug
Bah, humbug to you!
Avoid using '*' except in the form '@match *'. If the above conversation were
amended to also contain a '@match *', neither the 'hum*' nor the '*bug' keys
would work.
In fact, '*' is not needed as used in the above examples since '@match sss'
operates the same way as '@match *sss*' would be expected to operate in a
regular expression. Because of this, be especially careful with short word
matches like yes/no answers to questions. '@match yes' triggers when the
player enters any word with 'yes' in it! If a conversation contains the word
'yesterday' or 'nobody', the player might type one of these words and the NPC
might think they said 'yes' or 'no'.
b. Word Boundaries
If you want to prevent a match string from matching partial words, use the '^'
and '$' metacharacters to bound the word. In the first example, the NPC only
responds when the player says 'no', and not when the player says any other
word that contains 'no'.
c. Case Insensitivity
Keys need not contain case variations even though old maps often did. For
example, '@match hello' works just as well as the more verbose versions like
'@match Hello|hello' and '@match "[Hh]ello'. The matches are done after both
the match list and the player text are converted to lowercase.
d. Multiple Choice
The square braces may be used to construct special matches. For example, a
key of '[jy]ello' would match 'jello' or even 'yellow'.
e. Quest support
As a special case, if the line just after match is 'quest xxx', then
the NPC will only display the text (without the quote line) if the player
is currently doing indicated quest. See also 'quests' document.
Obviously this feature can be expanded extensively, so expect it
to evolve till the next version.
f. Other Considerations
You might not want to put messages into archetype creatures, this feature is
more for making special NPCs for maps. However, certain generic messages in
archetypes might add to the general game ambiance a bit (by default: dogs
would say "arf arf" guards would say "move along"...) - tm
====== 3. Objects in general ======
The name in parantheses after a flag description is the name as it should be
used in the archetype file. For example: editable field (editable)
===== Names (name, name_pl) =====
If no 'name' field is specified in the object, it will use the name from
the 'Object' field.
The 'name_pl' field is the plural name for the object. This only needs
to be set if there is the potential for the object to merge with others -
for example, there is no reason for name_pl to be set for floors, buildings,
etc, as they can not merge with other objects. Only objects that can
be picked up really need a name_pl value.
If name_pl is not set, this name defaults to the object->name value,
which was either explicitly set or determined from the Object field.
These name values are what the player sees for the name. As the player
sees it, the name may have the title appended to it, and may also
have other per type specific information added in (spell contained
within the spellbook for example).
===== Types (type) & Subtypes (subtype) =====
Specified in defines.h. A type determines how an item operates/what it does.
A type only needs to be added for a new archetype if in some area of the
program, it is actually used. Addition of new types is generally
a rare event.
For example, if adding a new monster, there is no need to add a new type
in defines.h if crossfire never checks the type element in the object
structure for that new type.
Most types are set for items that are applied, items that have special
properties.
You should look at the include/defines.h file for the latest type
information. Note that within maps, you should almost never change
the type field of an object - instead, you should start with an
object of the appropriate type and change the fields of the object
to appear as you want it.
Subtypes are related to types, in that it narrows down the scope of the
type of object. For example, the type may be the value for skill,
with subtype being the different skill it uses. Or for spell objects,
subtype could be the spell identifier.
Subtype is a new field as of April 2003. It's use needs to be extended.
As example of this is with all equipment items - they should get moved
to be of type 'equipment', with subtype specifying exactly what it does
(ring, helm, armor, etc).
Note that the meaning of the subtype is specific to the type itself - they are
not unique across all types. For example, for type equipment, subtype 1 might
be a helm. But for type skills, subtype 1 might be smithery. One should not
rely on subtype to convey any meaningful information unless the type of the
object is known or also examined.
The question may then be asked - when making a new arch, how do I know
if I need a new type, or if I should be the subtype of an existing type.
When to add a new type:
1) If code to support applying the object is completely different than
what exists in apply.c (eg, not reusing existing functions), or
2) If code to support movement of the type does not reuse existing
functions (server/time.c)
When to make a new subtype:
1) Your behaviour is _close_ to that of an existing type, but you want it
to be slightly different (eg, teleporters that don't work on players), or
2) You need to be able to differentiate between objects of the same type.
Eg, adding a new skill would add a new subtype, not a new type.
If your not sure, drop a mail to the crossfire developers list.
If there is a header file that contains all the other information related to
the object type, the subtype should be defined there. Otherwise, subtypes
should be defined in define.h. The subtype definitions should include be
prefixed by what they are a subtype for. Eg, SKILL_SMITHERY, SKILL_JEWELER,
etc, and not just SMITHERY and JEWELER. It is acceptable to abbreviate the
prefix if it is very long.
===== Client Types (client_type) =====
client type information in public information communicated to the client.
Client type differes from the type in several ways:
1) It is more specific than the type information.
2) The numbers used for client type are more logically grouped (all armor
related client_types are in the same range)
3) client type info does not have a functional component in the server - it
only conveys information - the server does not determine what an object
may or may not do based on this. At current time, the server does not
even look at the client_type for any information.
4) The client_type can be used to hide the real type of an item. Eg,
items of client_type poison should never be sent - client_type should
instead by booze so difficult for the client to know what the item
really is. similarly, special objects used in quests which appear
as something else (eg, a key appearing as a shovel) can use the
client type to have the type shown as the same category that
shovels would be in.
The client_type list below has large gaps - this is to allow future items
to be grouped with items of similar type (Eg, if a new weapon type,
say two-handed is added, it should be grouped with the weapons and not
put at the end of the table). The entire point of the client_type information
is to group the items together.
In the list below, the number in parenthese corresponds to the number in
define.h file. At the top of each group of items, the range is given. It is
intentional in most cases to leave the first entry of a range blank - this
gives room to place really important items of a type at the top. Note that
only items the player may be able to pick up or apply actually need types.
Note in most cases, the artifact type items are at the top of a group listing.
This is done for artifact items that already have a different face/name,
such that the player already knows they are special anyways.
client_type
Client Type Notes
1-49 Specials - items that should be very noticable to the player.
1 bomb (47)
41 power crystal (156)
50-99 Containers - put near top to make things easier for the player.
51 container (122)
51 big containers - chests, sacks, etc.
55 small containers (pouches)
60 specialized containers (quivers, key rings)
100-149 hand held weapons
100 Artifact weapons (15)
101 edged weapons (sword, scimitar, etc)
106 axes
121 clubs
126 hammers
129 maces
136 pole arms
141 chained weapons
145 oddball weapons (magnify glass, stake, taifu, shovel, etc)
150-199 Ranged weapons & ammo:
150 artifact bows (14)
151 bow (14)
159 arrow (13) Group ammo with firing type
161 crossbow
165 bolts
250-399 Armor, shields, helms, etc. Give each subtype a group
of 10 entries to further subdivide into. This is basically all
equipable items not in another group.
250-259 Bodywear (mails - 16) - ordered roughly in order of value
250 Artifact/special
251 Dragonmail - enough of these to warrant their own type
252 plate mails
253 chain mail, scale mail, & ring mail
254 leather armor
255 dress
256 robes & tunics
257 aprons
260-269 Shields
260 artifact shields (33)
261 Shields (33)
270-279 Headwear (34)
270 artifact helmets (34)
271 Helmets (34)
272 turbans (34)
273 wigs (34)
275 eyeglasses (34)
280 artifact cloaks (87)
281 cloaks (87)
290 artifact boots (99)
291 boots (99)
300 artifact gloves (100)
301 gloves (100)
305 gauntlets (100)
310 artifact bracers (104) - god given
311 bracers (104)
321 girdle (113)
381 amulets (39)
390 artifact rings (70)
391 rings (70)
450-459 Skill objects - these are items that give you a skill, eg
lockpicks, talismens, etc.
451 skill (43)
461 trap parts (76)
600-649 Food & alchemy related items. Flesh items double as both
eatabls and used in alchemy. Thus, we include the
inorganic items here so that most all the alchemy stuff
is located in the same general place in the inventory.
601 Food (6)
611 Poison (7)
611 drink (54)
620 Flesh item (72)
622 corpse (157) Used for raise dead spells
624 flesh items, quasi food - dragon steak
625 flesh item - heads, eyes, tongues, teeth (72)
626 flesh item - legs, arms, hands, feet, fingers, etc.
627 flesh item - misc - ichors, scales, hearts, livers, skin (72)
628 flesh items - dusts
641 inorganic - raw (73)
642 inoranic - refined (true lead, mercury, etc)
650-699 Single use spell casting items (scrolls, potions, balms)
651 potion (5)
652 balms, dusts (5)
653 figurines (5)
661 scroll (111)
700-749 Ranged spell casting items
701 rod heavy (3)
701 rod light (3)
711 wand (109)
712 staff
721 horn (35)
800-849 Keys
801 normal key (24)
810 special key (21) (archetype)
811-839 special keys that maps can override the value into. In this
way, all the special keys for a dungeon can be given the same
client type so they group together. Note that the map needs
to be modified to change the client_type of the keys to do this.
1000-1049 Readables
1001 mage Spellbook (85)
1002 cleric spellbooks (85)
1011 Armor improver (123)
1016 weapon improver (124)
1021 Skill scroll (130)
1041 Books & scrolls - information type objects (8)
1100-1149 Light emitting objects & lightables
1101 lighter (75)
1102 torch
1103 colored torches
2000-2049 Valuables - only real value is monetay
2001 money (36)
2005 gold nuggets
2011 gems (60) - this could be divided into more subtypes - probably better
for artifact gems to have a different type than worry about sorting
ruby, diamond, emerald, etc.
2030 Jewelery (60) - chalice, crystball
8000-8999 Misc - items of no specific use or can not easily be sorted.
8001 clock (9)
8002 furniture (15) - These can be used as weapons, but probably
shouldn't be.
8003 ten kilo
8006 bagpipe (24) - this is type key, probably shouldn't make it that obvious
8011 gravestone (38)
8012 boulders
8013 pillars
8015 flowers
8020 ice cubes
8021 transforming items
25000-25999 Non-inventory items, stuff stuck to the floor, that can be applied.
25011 Town portal (66)
25012 Exits, doors, buildings - much more mundane exits (66)
Note to arch writers; only need to set the client_type on
the head (this is the case for all other properties as
well).
25021 Ordinary signs (98), Shop Inventory (150)
25031 Imperial Post Office postboxes
25041 Slot machines
25042 Trigger (27), levers (93)
25091 Bed to reality (106)
===== editable field (editable) =====
Editable sole meaning is for crossedit. Crossedit uses editable to determine
what menu(s) the item should appear in. Crossfire does not use it at all.
The following table/values determine what menus the archetype will appear
in. When looking at this table to determine what the value of editable
should be, it is 2^(num-1). That is to say if you want it to appear in the
'shop' menu, it would be 2^6 and not 2^7. By default, objects default
to editable 1 - that is to say, they become monsters.
Asterisk(*) marks groups that are really editable.
0 (0) None - Internal archetypes (spells, abilities,
map, etc.)
*1 (1) Monsters - all monsters, generators and NPC's
*2 (2) Exits - all buildings, towns, teleprorts and other
exits
*3 (4) Treasures - Normally used maps as treasures
*4 (8) Backgrounds - different backgrounds (floors, woods, etc.)
*5 (16) Gates and door - everything that can be opened or closed
*6 (32) Special - directors, spinners, firewalls
*7 (64) Shop - All items needed in shops.
*8 (128) Normal objects - sacks, signs, gravestone, furnitures etc.
*9 (256) False walls - Walls that C. Animations (anim - mina) (facings)can be destroyed or
broken through.
10 (512) Walls - different walls, caves, dungeons etc.
11 (1024) Equipments - mainly weapons and armours
12 (2048) Rest treasures - foods, scrolls, potions, jewels, etc
13 (4096) Artifacts - Named weapons, special armors, etc
An archetype can belong to several editable families, by adding the values
together. For example, a value of 544 (512+32) would show up in both the
special and walls menu.
===== Animations (anim - mina) (facings) =====
This section will briefly try to explain how all the animation values
(anim_speed,last_anim, FLAG_IS_TURNING and FLAG_ANIMATE work together.)
In the archetype specification, there is a anim/mina sequence which lists
faces are used for animations. An example for the big dragon follows:
anim
dragon.171
dragon.172
dragon.173
dragon.172
dragon.131
dragon.132
dragon.133
dragon.132
mina
Anything that is animated must have such a sequence.
FLAG_ANIMATE (anim, mina)is used to inform crossfire that this object should
be constantly animated. A case where an anim section as above is used but
FLAG_ANIMATE is not set is for arrows and other objects in which the anim
field is instead used to determine what face to draw for different facings of
the object.
facings is used in conjunctin with FLAG_ANIMATE. This is a states
the number of facing the objects has (2, 4, or 8 - 1 is the default).
the number of faces in the anim/mina sequence must be a multiple of
num facings..
here is an example of using animation and facings:
anim
facings 2
fred.131
fred.132
fred.171
fred.172
mina
The facings go clockwise (1 north (up), 3 east (right), 5 south (down),
etc).
If there are fewer than 8 facings (which is typical), the same rotational
order is kept. So with only 2 facings, the first half in the group will be
used when the creature is pointing to the right, second half to the left.
anim_speed is used to determine how often the object is animated. IF
anim_speed is 0, then the object is animated anytime it gets an action.
If anim_speed is nonzero, then every anim_speed ticks, the object is
animated (irregardless of how fast the item is) last_anim is used internally
only to determine how many ticks have passed since the item was last
animated. anim_speed is useful for objects that otherwise move very
slowly but which need to be animated more often. Note: If anim_speed
is used, the object must still have a nonzero speed for it to work.
In terms of frequency of animations, 1/anim_speed = object speed.
Thus if an object has speed of 0.2, its anim_speed is effectively 5.
===== Material types (material) =====
Material bit
Paper 1
Iron 2
Glass 4
Leather 8
Wood 16
Organic 32
Stone 64
Cloth 128
Adamantite 256
The objects material affects how saving throws against an object affect it.
Thus, if paper is hit by fire, it tends to burn up, while iron does not. You
can look in common/living.c to see the exact values. Note that if the material
type is 0 (no material) or is Adamantite, the object can not be harmed in
any way.
An object can have multiple material types by adding these values together.
===== Item Power (item_power) =====
item_power measures how powerful and item is. This information is only
relevant for items that are equipped - one time use items, monsters,
walls, floors, do not use this.
When a player tries to equip something, the code goes through all the objects
the player currently has equipped and sums up their item_power. The
item_power of the object the player is trying to equip is also added. If
this total exceeds the characters level, he is not allowed to equip the
item.
In simple terms, the sum of all the players equip items item_power must
be less than the characters level.
Powerful items should have a higher item_power value. This basically
acts as a way to balance the items. It also prevents gifts from high
level characters to newbies from being very useful - the item_power may
prevent the low level character from equipping this items.
For items automatically generated by the treasure code, the following
formula is used:
# enchantments power
0 0
1 0
2 1
3 2
4 3
5 5
6 8
7 11
An enchantment is:
Each plus an item has.
Each point an item increases an ability.
Each 20% protection an item gives (rounded normally, eg 0-9 counts as nothing,
10-29 counts as one, etc)
Each attacktype a weapon has.
Spell path adjustments
This same formula can be used for custom objects to figure out their
item power.
While the item_power field in the object structure is signed, in general,
there should not be objects with a negative item power. However, negative
effects an item has may reduce the item power. Eg, a
'sword +4 (str +2)(wis -3)' would really be 3 enchantments.
Note: The enforcement of item power is currently not in use as of this
writing (Aug 2002). Further refinement is needed on the power rating
for items. However, if you are creating a new magic item, setting
an appropriate item_power would save work later on.
===== Body Location =====
The body locations information determines where the item is equipped onto
the character. If the character does not have the slot available,
they are prevented from equipping the item.
Some races may have a value of 0 for some locations, this denotes that they
can not use that particular item (just won't fit on them).
For monsters/players, the body location information is positive values -
this denotes how many locations they have for the different slots.
For items, the body location is negative, this denotes the spaces it
uses up. Note that if multiple locations are set in an item, all of those
spaces must be available to wear it (it is an AND operation, not an OR).
Thus something that has body_neck -1 and body_head -1 means that both the
head an neck must be available.
Currently defined list of locations:
load/save name # for humans What object types use it
body_range 1 Rod, horn, wand
body_arm 2 bows (2), weapon, shield
body_torso 1 armour
body_head 1 helmet
body_neck 1 amulet
body_skill 1 skills (holy symbols, talismen, lockpicks,
writing pens)
body_finger 2 rings
body_shoulder 1 cloak
body_foot 2 boots
body_hand 2 gloves
body_wrist 2 bracers
body_waist 1 girdle
Using body locations:
Using this information is quite easy - for objects, just add the approprate
body_.. with a negative value. For monsters, put those in with a positive
value. If a monster has a location to use an object, is is presumed in the
code that the monster should pick up/equip objects into that location.
Thus, setting these for monsters may not really match what they have,
eg, kobolds have arms, but it is still set to 0 so that they won't equip
things. The above information largely replaces the CAN_USE information.
Note that the unqualified names above only refer to human locations. New
locations for dragons or other creatures can easily be added.
Adding body locations:
The steps for adding a body location is as follows:
1) Update the table above for documentation purposes.
2) Update the NUM_BODY_LOCATIONS in include/object.h.
3) Update the body_locations structure in common/item.c. Be sure to read
the comments above the structure.
4) recompile
5) create some items that use these new locations.
Note that most the code itself sees all this as abstract - it doesn't know
what goes in what location, or even what each location is called.
However, a few bits do care - the skill stuff checks to see if you have
any arms free - thus, BODY_ARMS is defined so we know if the player
does or does not. The alternative to this would be to have the
skill stuff do a strcmp, but then we are defining the name - easier
to just presume that the location won't change in teh body_locations
table - there is no reason that it should.
===== Meaning of certain attributes for certain items =====
All objects have strength, intelligence, wisdom, dexterity, constitution,
charisma, experience, and spell points. However, how each is used
varies for different objects. Here is a PARTIAL rundown:
For rings, str, int, wis, dex, con and cha are modifiers to the users
abilities.
For treasures (chests, random_???), hp is the number of items that
should be generated. A chest with hp of 5 will generate 5 treasures,
a random_scroll space with hp of 5 will generate 5 random scroll types (of
which, each scroll type may number more than one - see the treasures
file for more information.)
For shop floors and treasures, exp is the difficulty to use for
creating the treasure. If exp is 0 (which it is by default), then the
map difficulty is used instead.
For armour, last_sp (ARMOR_SPEED) is the maximum speed that the
character can have while wearing that armor.
For armour, last_heal determines the penalty for spell point regeneration.
For exits:
slaying = The map which the exit leads to.
hp,sp = (x,y) of the destination on the new map.
===== Lore =====
Lore is a free form text field similiar to the msg bug. Its syntax is
lore
..
..
endlore
while msg's meaning is dependent on the object, lore is consistent - it
should contain background information on the object, or other somewhat general
details about the object. It will be put into books, possibly used by npc's
and other places where general knowledge should be presented.
===== MOVEMENT TYPES =====
The movement types (MOVE_..) is a bitmask that determines which method
of locomotion the object is using, and is also used to determine what
types of movement the space blocks. From define.h:
#define MOVE_WALK 0x1 /* Object walks */
#define MOVE_FLY_LOW 0x2 /* Low flying object */
#define MOVE_FLY_HIGH 0x4 /* High flying object */
#define MOVE_FLYING 0x6 /* combo of fly_low and fly_high for easier checking */
#define MOVE_SWIM 0x8 /* Swimming object */
#define MOVE_BOAT 0x10 /* Boats/sailing */
#define MOVE_ALL 0x1f /* Mask of all movement types */
MOVE_ALL may change in the future - it is mask for all movement types -
used for 'no_pass' - it sets move_block to MOVE_ALL, other places that
check for all movement types may also use this value.
It is possible to use string names instead of the numeric bitmask in
the move_fields below. It is strongly encouraged that the string names be
used for improved readability. In addition, using string names, especially
'all', will result in easier maintability in the future. For example, if you
specify 'move_block 31' right now, that is equivalant of all. However, if new
move types are added, using a numeric option will not block the new movement
types, where if 'move_block all' was used, it continue to block everything.
The string names are same as the MOVE_ defines, but with the MOVE_ portion
removed, eg, 'walk', 'fly_low', 'fly_high', etc. Multiple types can be
listed, seperated by a space. In addition, a - (minus) can precede the name,
which means to negate that type. These are all equivalant:
move_block 6
move_block fly_low fly_low
move_block flying (special symbolic name)
move_block all -swim -walk -boat
Note the order when using the -(negation) is important - the string is parsed
left to right. This is not equivalant to the above:
move_block -swim -walk -boat all
Because it will clear the swim, walk and boat flags, and then set the flags to
all.
Also, using only negation is not allowed - you can not do:
move_block -walk
To indicate you want to remove only the walk blocking from the archetype -
you must include a positive indicator.
For all practical purposes, using negation only makes sense if using the
keyword 'all'. However, if more movement types are added, with symbolic names
that include several movement types (eg, MOVE_LAND), using the negation with
those names may make sense.
Be aware that when the field is saved out, it may not be saved exactly as it
was specified in the load file. This is because the server converts the
string to an int at load time, then converts it back to a string.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
The fields in the object themselves:
move_type: Bitmask of above values which determines what form of movement
this object uses. For objects equipped by player/monster, move_type grants
that movement.
Note that move_type of MOVE_FLY (0x2) replaces FLAG_FLYING.
In general, creatures will only have 1 movement type active at a time.
move_block: Represents what movement types are unable to pass this space.
If the creature has multiple movement types, they may still be able
to pass the space. For example, a player has MOVE_WALK | MOVE_FLY.
He tries to move onto a space that blocks MOVE_WALK - not a problem,
a he just flies over.
move_allow: This overrides move_block - basically, this allows movement
of the specific type on the space, regardless of move_block of other
objects on the space. This is most useful to set on objects that
should temporary change the characteristics of the space.
move_on/move_off: Take bitmasks - represents for what movement types
this object is activated on. Replaces the walk/fly_on/off values
move_slow: Like move_block, but represents what movement types are slowed
on this space. Note that it is not possible to specifiy different
penalties for different movement types in the same object. However,
multiple objects with different move_slow values (and penalties) can
be put on the same space. This replaced FLAG_SLOW_MOVE, which is
converted to only slow down walking movement
move_slow_penalty (was slow_move) - how much the player is slowed down.
This value is a float (before it was an int converted to a float
at load time). It is basically how much slower (percentage wise)
the player moves through this terrain. A value of 0 is basically
a non operation. A value of 0.5 means it takes 50% longer to move
through the space. The old values were all positive ints. Basically,
it effectively was how many ticks the player is slowed down by.
Certain terrain has skills which reduce the slow penalty (woodsmen
in forest for example). As of this writing, the penalty is reduced
to 1/4 of what it would be. Eg, a move_slow_penalty of 1.0 would
say it takes twice as long to move through the space. If the player
has appropriate skill, it would now only take that player 25%
longer to move through the space.
Note 2: The old slow_move is loaded and converted into move_slow_penalty.
The old SLOW_PENALTY and SET_SLOW_PENALTY macros divided/multiplied
the result by 1000, so were basically a non operation. Since it is now
just stored as a float, conversion macros are not needed or used.
move_state/move_status: This is unrelated to this movement code - it is
used for monster attack_movement information. it is only noted here
since it starts with the move_ prefix.
msg/endmsg: If an object has move_block of move_slow and that affects
the player movement, the objects message will be printed to the player -
thus things like 'The jungle slows you down' or 'The wall is in the way'
will be printed. Various hints can be contained in the messages.
move_status: Not related to this code - noted here since it has the move_
prefix. This is used to track monsters state of the attack_movement
variable. It is worth noting that move_type was changed to
attack_movement - this matches the name in the archetype, but is
a name change in the object field.
Obsoleted fields:
This change of logic has resulted in the following fields no longer
being used:
FLAG_WALK_ON -> move_on
FLAG_NO_PASS -> move_block
FLAG_SLOW_MOVE -> move_slow
FLAG_FLYING -> move_type
FLAG_WALK_OFF -> move_off
FLAG_FLY_ON -> move_on
FLAG_FLY_OFF -> move_off
FLAG_PASS_THRU -> was unused, would be move_type
FLAG_CAN_PASS_THRU -> was unused, would be move_type
Load/Save behaviour and backward compatability:
The loader knows about certain old flags (walk_on, blocked, etc) and
sets up the appropriate bitmasks. When data is saved, it is saved
as the move_... with actual bitmasks.
Special player notes:
Player can only pick up items if MOVE_WALK is set (this may need
to be expanded down the road). Basic idea is that if you are flying,
can't reach the ground, if swimming, don't really have any free hands
to grab anything.
====== SPECIAL OBJECTS ======
===== MAPS =====
see doc/map-technical for this information.
===== HOLY_ALTARS =====
(re-done code by Mark Wedel)
Holy altars are altars for the various religions. Praying at a
holy_altar will make you a follower of that god, and if you already follow
that god, you may get some extra bonus. Meaning of the fields
level: To re-consecrate an altar, the players skill level must be as
high or higher than the level field. In this way, some altars can not
be re-consecrated, while other altars, like those in dungeons, could be.
other_arch: The god that this altar belongs to. This replaces the
title field that used to be used.
===== DISEASES =====
by Peter Mardahl
The following describes some things about the archetype
and implementation:
Stat Property Definition
attacktype Attack effects Attacktype of the disease. usu. AT_GODPOWER.
other_arch Creation object created and dropped when symptom moved.
wc+ Infectiousness How well the plague spreads person-to-person
magic+ Range range of infection
Stats* Disability What stats are reduced by the disease (str con...)
maxhp+ Persistence How long the disease can last OUTSIDE the host.
value TimeLeft Counter for persistence
dam^ Damage How much damage it does (%?).
maxgrace+ Duration How long before the disease is naturally cured.
food DurCount Counter for Duration
speed Speed How often the disease moves.
last_sp^ Lethargy Percentage of max speed--10 = 10% speed.
maxsp^ Mana deplete Saps mana.
ac^ Progressiveness How the diseases increases in severity.
last_eat*^ Deplete food saps food if negative
exp experience experience awarded when plague cured
hp*^ ReduceRegen reduces regeneration of disease-bearer
sp*^ ReduceSpRegen reduces spellpoint regeneration
name Name Name of the plague
msg message What the plague says when it strikes.
race those affected races the plague strikes (* means everything)
level Plague Level General description of the plague's deadliness
last_grace Attenuation reduction in wc per generation of disease.
This builds in a self-limiting factor.
Explanations:
* means this # should be negative to cause adverse effect.
+ means that this effect is modulated in spells by ldur
^ means that this effect is modulated in spells by ldam
attacktype is the attacktype used by the disease to smite "dam" damage with.
wc/127 is the chance of someone in range catching it.
magic is the range at which infection may occur. If negative, this is
not level dependent.
Stats are stat modifications. These should typically be negative.
maxhp is how long the disease will persist if the host dies and "drops" it,
in "disease moves", i.e., moves of the disease. If negative, permanent.
value is the counter for maxhp, it starts at maxhp and drops...
dam if positive, it is straight damage. if negative, a %-age.
maxgrace how long in "disease moves" the disease lasts in the host, if negative,
permanent until cured.
food if negative, disease is permanent. otherwise, decreases at <speed>,
disease goes away at food=0, set to "maxgrace" on infection.
speed is the speed of the disease, how fast "disease moves" occur.
last_sp is the lethargy imposed on the player by the disease. A lethargy
of "1" reduces the players speed to 1% of its normal value.
maxsp how much mana is sapped per "disease move". if negative, a %-age is
taken.
ac every "disease move" the severity of the symptoms are increased by
ac/100. (severity = 1 + (accumlated_progression)/100)
last_eat increases food usage if negative.
last_grace Reduction in the diseases' contageousness everytime it infects someone
new. This limits how many generations a disease can propagate.
For SYMPTOMS:
Stats modify stats
hp modify regen
value progression counter (multiplier = value/100)
food modify food use (from last_eat in DISEASE)
maxsp suck mana ( as noted for DISEASE)
last_sp Lethargy
msg What to say
speed speed of movement, from DISEASE
===== CONVERTERS =====
other_arch = which archetype to convert into
slaying = which archetype to convert from
sp = how many other_arch to create
food = how many items are needed to convert into <sp> other_arch
===== BOWS & ARROWS =====
Missile weapons (type BOW) can be used to shoot missiles
(type ARROW). The most common wepons are bows and crossbows
but other weapons are also easy to implement (e.g. a sling).
The following variables have the same meaning for both weapons
and bullets:
race type of missile (indentifies weapon and missile pairs)
dam the basic damage
wc the basic wc
magic the magic bonus
And these two used only for arrows.
hp the basic damage (internal use)
sp the basic wc (internal use)
food the breaking probability after a shot (0-100)
And these two are for bows.
sp the shooting speed (% of normal speed, 1-100)
no_strength player's strength or monster's level doesn't affect
the damage done by bow.
The other variables has their normal meanings.
===== object creating objects =====
by peterm
What a creator is, is an object which creates another object when it is
triggered. The daughter object can be anything. (yet another way other
than runes to create surprise monsters, though runes are better for that,
they're smarter at placing monsters)
You've seen a creator demonstrated if you've solved the Tower of
Demonology: when you summon a demon you also get some firetrails
Creator object: an object which creates other objects. It is usually
invisible.
other_arch the object to create
connected what will trigger it (button, magic ear)
hp number of times to create before dissappearing
lifesave if 1, it will create the object every time it's triggered,
and never disappear
slaying the name the created object will bear
level the level the created object will have
===== Player Movers =====
by peterm
Player movers are objects which move objects above them. These objects
must be alive. They are directional, so players can be made to move in
a pattern, and so can monsters.
Motion is involuntary. Additionally, players or monsters can be paralyzed
so that they MUST move along a chain of movers.
Multisquare monsters can be moved by movers, however enough space is required.
Here is the meaning of various fields:
attacktype: if nonzero, paralyzes anyone it moves (so they are forced to
move along a chain). Default values is 0
maxsp: the number of moves that the paralysis will rob the player of,
if unset, and attacktype is nonzero, this becomes 2. By default,
it is zero.
move_type: What movement types this mover moves (replaces maxhp to denote
flying creatures)
speed: how fast a chain of these will move a player along (default -0.2)
sp: the direction--if unset (0) motion is random.
level: if nonzero, players will be moved as well as monsters. 0 by default.
lifesave: whether it can be used up, meaning is opposite, it may go away
if lifesave is set. default is not set.
hp: if lifesave is set, the number of times (-1) it will move a player
(i.e., it will move someone hp+1 times before it vanishes.). default
0
subtype: a bitmask that specifies which of arch, name, and race affect the
race and slaying flags. If unspecified (or zero), all will be searched.
The LSB is arch, the next bit is name, and the third bit is for race.
Table for the lazy:
subtype 1: only arch
subtype 2: only name
subtype 3: arch or name
subtype 4: only race
subtype 5: arch or race
subtype 6: name or race
subtype 7: all three
race: only affect objects with a arch/name/race matching this.
slaying: don't affect objects with a arch/name/race matching this.
Note from Mark: Player Movers and Directors are seperate objects, even
though they look and act similar. Directors only do spells/missiles,
however, while player movers only do living creatures (depending on how it
is set)
===== Directors =====
Directors are objects that change the direcion of objects moving through the
air such as spells and missiles. As in the noted in the section on player
movers, they act similar, however in constrast they only affect spells,
missiles, or other flying projectiles.
Here are the various fields:
sp: the direction--if unset (0) motion is random.
subtype: a bitmask that specifies which of arch, name, and race affect the
race and slaying flags. If unspecified (or zero), all will be searched.
See the section above on playermovers for what subtypes mean what.
race: only affect objects with a arch/name/race matching this.
slaying: don't affect objects with a arch/name/race matching this.
===== Magical Walls -- walls that cast spells =====
Magical walls are like other walls, except every now and then,
they fire spells.
Magical walls can contain any spell. However, some spells do not operate
very successfully in them. The only way to know is to test the spell you
want to use with a wall.
Several types of magical walls are predefined for you in the archetypes, and
can be found on a pick-map available in crossedit.
If you want a magical wall which is not already defined, all you need to do
is choose one of the predefined walls, and modify the 'dam' variable. The
'dam' variable contains the index of the spell. See include/spellist.h to
find your desired spell.
Meaning of archetype fields:
field: Meaning:
dam spell the wall will cast
sp integer direction the wall will cast the spell. If 0,
the wall will cast the spell in random direction.
ac armour class of wall
exp experience value of the wall
speed speed of the wall--you can fine-tune how fast the
wall will cast spells
alive 1 means it can be attacked, 0 means not
hp, maxhp hit points
immune immunity OR mask
type for magical walls, this is 62
other_arch obsolete now, means nothing
maxsp has to do with turning walls. The wall will turn
by 'maxsp' every time it fires, changing face.
To make a wall turn, it is sufficient to set this
to 1. Setting it to 8 or any multiple thereof is
an exercise in futility.
level The level the spell will cast spells at. Level 1
walls will cast spells at minimal strength. Level 100
walls will cast deadly spells.
connected either rotate the wall or trigger it. If triggering,
set speed to 0 for best results.
===== Containers =====
container <xxx> : the maximum weight the container can hold
(stored internally in weight_limit)
Str <xx> : reduces the weight of the objects in the container
0 == no reduction, 100 = weightless
===== Mood Floors =====
("Brian Thomas" <thomas at astro.psu.edu>)
last_sp field is used to determine what will happen to the monster
when the floor is activated:
(based on value that last_sp takes):
0: 'furious' Makes all monsters aggressive
1: 'angry' As above but pets are unaffected
2: 'calm' Makes all monsters unaggressive
3: 'sleep' Puts all monsters to sleep
4: 'charm' Makes monster into a pet of person
who triggers the square. This setting
is not enabled for continous operation
===== Altars, Triggers, Detectors and other connected items =====
Note: This is not quite complete documentation, but is correct as far
as it goes (0.92.1)
slaying: What the sacrifice must match. It either matches the archetype
name (internal value only), object name, or slaying field of object.
"money" is a special case - in this case, an exact name is not needed, any
types of money will match.
food: How many objects must be sacrificed. If slaying is money, then the
value of the money must be greater than the food value (ie, if food=200,
then 200 sp, 20 gp, or 4 pp will all work.) Note that this is stored
in a 16 bit signed value - thus the maximum is 32767.
msg: What to print when the altar is activated.
connected: A link to another object to activate.
sp: Spell number to cast when activated.
level: What level to cast the spell at.
hp: If set, use hp to match to that object type.
Note: For all sacrifice types, the number to activate the altar must be in
one object. Thus, in the above money example, 100 sp and 10 gp would not
work. Likewise, if the needed sacrifice was 2 swords, 1 normal sword and 1
+1 sword would not work, even though 2 of either one would.
Quick summary of the different altars:
==== TRIGGERS ====
TRIGGERS are slightly different than normal buttons/pedestals/whatever in
that they reset after a short amount of time. Thus, they can be used to
open a door for a short amount of time. Triggers use stats.wc as
a temporary storage value to note activation.
stats.exp is used do determine when the trigger resets. A smaller value
means faster reset.
stats.ac is used to store the old value of the condition for TRIGGER_BUTTON
and TRIGGER_PEDESTAL to trigger only when condition changes from false to true.
TRIGGER_BUTTON: if weight on the button is greater than the weight value
for the trigger, push a trigger.
TRIGGER_PEDESTAL: IF a matching object is on top of the pedestal, then trigger
a trigger.
TRIGGER_ALTAR: Takes a sacrifice, then pushes a trigger.
If "last_sp 0" is set, the altar will trigger the connected value TWO
times per sacrifice: Once by dropping the sacrifice, second by altar reset.
If "last_sp 1" is set, the altar won't trigger the connected value
by reset - Hence, only ONE time per sacrifice.
TRIGGER (handle): Pushes a trigger.
Note: At one time, there was a difference between triggers and buttons - they
were considered different types for activation. However, now they are all
the same - a button can push a trigger, and vice versa. And of course,
triggers can activate other triggers, and the same for buttons.
==== PEDESTALS ====
These are sort of combo buttons & altars. If the pedestals race matches
the slaying of an object on top (race of player matches any player), then
push the connected objects. By default, pedestals match players. They
differ from buttons in that specific objects activate them (vs an amount of
weight.) They are different from altars in that the object that
activates them does not disappear.
==== Inventory checkers (64) ====
Inventory checkers passively check the players inventory to see if it
contains some object. Thus, you can make portals which you can't pass through
if you contain certain objects.
slaying: Object name we are looking for.
race: archetype name we are trying to match for.
hp: match on object with that type value.
last_heal: Remove object if found.
last_sp: If set, than having that object is a match. If 0, then not having
that object is a match.
connected: Value to to push.
no_pass: If set, you can only pass through that space if you be allowed to
(depending on last_sp determines if having/not having is the match
criteria.) if no_pass is 0 (default), then the inventory only acts as
a trigger/button.
General usage notes: Putting a check_inventory space in front of a gate with
another on the other side works reasonably well as a control mechanism. Note,
however, that other people may still be able to slip by. To get around this,
use the no_pass to 1, and put it in the space you want to control (probably
makes sense to put a fake door or other object there to make it a little more
obvious what is going on.)
==== DETECTOR ====
This object samples the square its in, and if it finds an object
named in the slaying field, it toggles its connected value. Detectors are a
lot like pedestals - the only really difference is that they sample the
space periodically, where as pedestals will get triggered the instant
something is dropped. The use for pedestals is to add some indeterminate
time delay (indeterminate since you can never be sure at what point in its
timing the player will actually drop something on the detector.) Personally,
I don't see much if any use for detectors. (The author of this last sentence
didn't realize that if you blow a spell over a detector, it may be detected,
but a pedestal won't notice it.)
slaying name of the thing the detector is to look for
* note: FORCEs with slaying fields == slaying field of detector
will be detected.
speed time between samples
connected connected value of detector
sp 1 if detection sets buttons,
-1 if detection unsets buttons
hp 1 if it is to search through an inventory of an object
sitting over it
==== MARKER ====
This object inserts a force into a player who stands on it.
This force does nothing except contain a string in its slaying field
which can be discovered by a detector.
slaying the code
speed how quickly it will mark something standing on it
food duration of the force it inserts. If nonzero, the duration
is finite: about 1 food per 10 seconds
name slaying field of a force to remove.
See also the 'quests' file for special values on slaying field.
==== NOTE ABOUT ALL CONNECTED ITEMS ====
Whenever an object that is connected gets activated, all other objects
with the same connected tag also gets pushed. For some objects
(pedestals, inventory checkers) this is likely to be meaningless. However,
if something like an altar is pushed in this fashion, it will no longer
be usuable (only take one sacrifice, and being activated in this fashion
makes it so that it looks to have been activated.)
One trick for connected objects that you want activated once: Set your
initial connects to a set (or multiple sets) of iron spikes that are in
a 2x1 enclosed area. On top of the spikes, put a boulder, and on the
other space, put a large button that is then connected to whatever object.
Thus, when the spikes are activated, they push the boulder to the other
space, that then activates whatever is desired.
===== Signs =====
msg: what to print when applied.
food: how many times the sign can be read.
last_eat: how many times the sign has been read (only used internally.)
If food is zero, there is no limit on how many times the sign can be read.
===== POISONOUS BOOZE =====
stats.hp Poison player or monster that applies this booze with stats.hp
poison damage.
stats.hp must be greater 0 to do damage. It used to be less than 0 for
-stats.hp direct damage, but that has changed. stats.hp <= 0 now means no
damage at all, just loss of 25% food.
===== Duplicators =====
Duplicators copy or remove objects. Duplicators are triggered objects.
connected: Connected value for the duplicator.
other_arch: Archetype that this copies - if the archetype on top of the
duplicator doesn't match this, it isn't copied. Note that it only
matches the archetype - the object can then be further duplicated. For
example, if other_arch is sword, it will duplicate sword +4, different
attacktypes, etc, and all of those are duplicated. But it will not
duplicate a dagger for example.
level: The number of copies to make (1 means no changes). If set to 0
the object is removed.
Example:
arch duplicator
level 2
other_arch sword
connected 5
end
Where 5 is connected to a lever. When the lever is pulled, if a sword object
is on top, its number is doubled. If there is anything else on top, it is
unaffected. If the lever it is connected to is not pulled, it is also
unaffected.
===== Transports =====
Tranports are objects that help the player move. These should not be confused
with EXITS, which instaneously transport a player from one map to another.
Instead, tranports may let the player move faster, give them move types they
don't have, etc. A simple example of this would a horse. It doesn't let the
player move anyplace he normally couldn't go, but lets him get there faster.
Ships would be another case - the player normally can't move accross water,
but with a ship, he can.
Meaning of various object attributes (KV means the value is stored in the
key/value list, and thus the get_ob_key_value() and set_ob_key_value()
routines need to be used.
move_type The move type this object has.
move_allow Normal meanings - useful for things like boats so people
can actually get on the boat.
speed How fast the object moves
weight_limit How much this object can carry.
weight_speed_ratio (KV)
This value is taken as a percentage which is multiplied
against against the weight this object is carrying (the
player) - this is then divided by weight_limit to determine
the effective loading to determine effective object speed, eg:
speed = base_speed - (base_speed * pl->weight *
weight_speed_ratio) / (weight_limit * 100)
Thus, if weight_factor is 0, this object will move the same
speed no matter how loaded it is. If it is 100, then
if the transport is fully loaded, it moves at a crawl.
In a sense, this somewhat mimics the player movement
speed. Large transports, like boats, should likely be
largely unaffected by weight (maybe have this value at
10), where something like a horse would have a relatively high
value.
base_speed(KV) This is only needed if weight_speed_ratio is set - it is used
to know what the base speed to use in the calculation (since
speed is getting clobbered). If this is not set and
weight_speed_ratio is set, the archetypes speed will be used.
passenger_limit(KV)
How many players this transport can hold. Thus, boats can
transport a party (this being set to 6) while horses could
only transport a single person. If this is not set, a default
of 1 will be used.
face_full
It may be desirable to have different faces to denote what
the tranport looks like if someone is on it vs not (mounted
horse vs just a horse). This is used to denote what it will
look like when loaded. If the tranport becomes empty, it will
fall back to the archetype face.
anim_full Like face_full above, but for animated objects.
Usage/implementation details:
To activate a transport, the player will apply it just like any other object.
When this is done, the pl->contr->transport will point to the transport.
If the player is the first to board it, then transport->contr will point to the
player. The player is placed into the inventory of the transport.
When on the transport, the player will see other objects on the transport.
When the player issues a map command, if they are the 'captain', the
tranport moves as directed. If not, the move command is ignored. Note
that players on the transport can issue other commands (say, cast, etc).
Some special handling is done relating the player and transport speed so that
transport speed is used. IF the transport doesn't have speed to move,
the move command is ignored. The player speed_left is set to -0.01 when
on the transport - in this way, the player will get actions and not limit
transport speed.
When aboard a transport, the player will be in the inventory of the transport.
The player can see other objects in the transport. If the player drops an
item, it is placed into the transport inventory, and not the map.
When hit_map() hits the transport, we examine look for all players in the
transport and damage them as appropriate. Note that items are not
damaged.
As of this writing, transports are non living creatures, and thus can't
be damaged.
====== Flags & specifications: (usage: flag value) ======
Note: the flags are case sensitive.
G = generator. O = object.
Note (961129): These notes look correct as far as they go. However,
oftentimes, the real effect in game terms might be more complicated than
list here. As an example: Exp value is just base - it will be further modified
based on stats, levels, and potentially skills.
Flag syntax Value
=========== =====
Object <name> name of O, internal refs only.
name <name> name of O as seen in the game.
race <name> race of O, internal.
slaying <name> Those O's with this race receives 2x damage.
other_arch <other obj> which other O this G generates.
More use between linked object defs.
anim
. which bitmaps to use in animation of the O.
. If TEAR_DOWN flag is set, this contains the different
. stages of being destroyed.
face name Name of the face (ie, food.111)
.
mina
end terminates definition of this O.
last_heal <no> Internal use (for regaining hit-points)
last_sp <no> Internal use (for regaining spell-points)
last_eat <no> Internal use (for consuming food)
speed <no> speed of O. A negative number means that speed_left
will be randomized when the object is loaded.
speed_left <no> speed of O remaining, internal.
face <bmap no> bitmap first drawn for O.
Str,Dex,Con,
Wis,Cha,Int <no> default ability for O.
hp,maxhp,sp,maxsp <no> default value for O hitpoints, spellpoints.
maxsp In main.c:fire() which arrowtype to use
Number equal to to the arrows type definition.
exp <no> Xp gained for killing O.
food <no> nutrition value for O. *DANGEROUS* as it's also
used to contain internal values for non-edible
objects. This should be changed in future.
dam,wc,ac <no> default damage, weaponclass, armorclass.
dam 0 gives a 'friendly' monster ;)
wc main.c:move_gate(). Is used by gates to indicate in
which position they are.
x,y <no> relative coords for bmap when using large objects.
x=y=0 is default, x=1 is second bmap in first row etc.
nrof <no> No. of O:s. 0 means that objects of this type
are not to be joined/split (it's a lone object).
level <no> O:s level.
direction In which direction (1=north, 8=north-west) this O is
moving (flying). Simple schematic of the dirs:
812
7-3
654
type <no> the object as defined in 'defines.h'
material <no> the sum of materials in this O. (see materials.)
value <no> the value for this O.
weight <no> the weight for this O.
carrying sum of the weight of objects within this object.
attacktype <no> type of attack from O. (see attacks)
invisible <1> set if O is invisible.
magic <no> magic modifier of O. (bracers +3 has magic 3)
state internal. Used when animating the object
alive <1> set if O is alive (can be attacked).
applied set if object is readied/worn/etc.
unpaid set if object is unpaid (internal)
no_pick <1> set if O can't be taken.
no_pass <1> set if O can't be passed. (eg, a closed door)
walk_on <1> O is applied by anything walking onto it.
walk_off <1> O is applied by anything walking off it.
fly_on <1> O is applied by anything flying onto it
fly_off <1> O is applied by anything flying off it.
is_animated <1> set if O is animated.
flying <1> set if O is flying (used in fly_on/fly_off).
monster <1> set if O is a monster.
friendly <1> set if O will help player instead of attacking.
generator <1> set if O is a generator.
auto_apply <1> O is applied when it is loaded (for instance, some
chests open automatically when the map is loaded)
treasure <1> not used yet.
apply_once <1> not used yet
see_invisible <1> set if O can see invisible player.
can_roll <1> set if O can be rolled.
is_turnable <1> set if O can be turned 'automagically'
is_lightable <1> set if O is something like a lantern that can be lit
is_used_up <1> bizarre. O is used up after created, eg an explosion.
identified <1> true if the item has been identified.
reflecting <1> set if O is reflective.
changing <1> set if O will change appearance.
splitting <1> set if O will divide.
hitback <1> set if O hits when being hit.
blocksview <1> set if O blocks line of sight.
undead <1> set if O is undead.
scared <1> internal (O is running away from players right now)
unaggressive <1> internal (not used yet)
color_fg <no> foreground color of O. Remember to set face/anim first!
color_bg <no> background -"- - "" -
reflect_missile <1> set if O throws back missiles.
reflect_spell <1> set if O throws back spells (some).
no_magic <1> set if O totally resists magic (*use with care*)
tear_down <1> set if O can be torn down (using animations and hp).
run_away <no %> percentile of hp left which causes monster to flee.
pass_thru <1> set if O can be passed thru by objects <below>.
can_pass_thru <1> set if O can pass thru objects <above>
pick_up <value> Which items monster will pick up (see pickup (above))
is_buildable <1> set if items can be built on top of this O.
====== TREASURES (and Abilities) ======
The treasures are kept in LIBDIR/treasures. Their format is:
treasure <name>
<item>
more
<item>
end
Also, 'treasure' above can instead be 'treasureone'. This means
that only 1 item on that list will be generated. The chance for
all objects on that list are summed together, and one is then generated.
And the format for an item is:
arch <name>
nrof <n (random 1 to n items generated)>
magic <max-magic>
chance <1-100%>
yes
<item>
no
<item>
end (or "more", if this is not the last element)
If "magic" or "nrof" is omitted, it is set to 0.
If "chance" is omitted, it is set to 100%.
"yes" tells what can be generated if this item was generated.
"no" tells what can be generated if this item was not generated.
"yes" and "no" can of course be omitted.
Note: the 'no' and 'yes' fields are meaningless in treasureone
treasurelists.
Also, instead of an item, a list to transfer to can be used instead.
The format is the same as for an object, but instead 'list <list>' is
used instead of 'arch <name>'.
For list transitions, the chance, yes and no fields have the
same meaning. 'magic' is used to determine the difficulty required
to transfer to the new list.
If the list is of type 'treasureone', and a list transition fails,
what happens next is determined by the 'nrof' field. If it is zero,
no object is generated. If 'nrof' is one, than another attempt is
made to generate an item (or list transition) from that treasurelist. There
is a maximum number of attempts that can be made.
Also, a reserved list name of 'NONE' is allowed. This means that no
item should be generated (of relevence only on treasureone lists.)
To use such a treasure, just put "randomitem <name>" into any
archetype in the archetype-file. Random treasure will then be generated
whenever such a monster is generated by generator, or when a map
containing such <monsters> is loaded for the first time.
ABILITIES
Adding in invisible objects like known spells and skills gives these abilities
to the object.
for example:
treasure pirate
arch skill_stealing
chance 50
arch skill_throwing
no
arch skill_punching
end
more
arch heart
chance 5
more
list standard
end
or
treasure skeletalmage
list standard_old
more
arch ability_fear
more
arch ability_frostbolt
chance 67
end
Treasure lists of gods are special. See below.
------------------------------------------------------------------------------
GOD INTERVENTION:
Treasure lists of gods are special. They must be of 'treasure' type,
not 'treasureone', and the 'yes' and 'no' fields must not be used.
The contents of a god's treasure list is not used by
create_treasure(), but by god_intervention() which traverses this list
from beginning to end until an item causes an action. The "chance" in
the treasure list can be used to randomly skip items, but items that
don't have an effect (e.g. healing follower, but follower isn't
injured) will be skipped anyway. The meaning of the different items
in the list is:
Treasure list reference:
Such a list is passed to create_treasure() with flag GT_STARTEQUIP.
The generated treasure is put into the followers inventory. The
follower can get unlimited amounts of this treasure just by praying
long enough. See below ("other visible items") for an alternative
way of giving items to followers.
Invisible books (with specific names):
Can be accessed through determine_holy_arch() which will return the
item's other_arch field. For example, such book with name "avatar"
determines the avatar archetype for the "summon avatar" prayer.
Invisible book with name "grace limit":
If follower doesn't have maximum grace, or follower's grace is less
than item->stats.grace, a "holy possession" prayer is invoked and the
function returns. Can be used to limit the lower part of the treasure
list to followers with much grace.
Invisible book with name "restore grace":
If the follower's grace is negative, sets the grace to a small
positive value and returns.
Invisible book with name "restore hitpoints":
If the follower's hitpoints are not at their maximum, sets hitpoints
to maximum and returns.
Invisible book with name "restore spellpoints":
Can restore the followers spellpoints. The maximum spellpoints for
this effect are calculated using this formula:
max = follower->stats.maxsp * (item->stats.maxsp / 100.0)
In other words, the item's stats.maxsp is the maximum in percent
relative to the followers normal spellpoint maximum. If the followers
current spellpoints are below 50% of 'max', they are set to a random
value between 50% and 100% of 'max', and the function returns.
Invisible book with name "heal spell":
Casts a heal spell (which spell is determined by item's slaying or
stats.sp field) and returns if the spell was successful.
Invisible book with name "remove curse":
Removes curse from all cursed (but not damned) items, returns if curse
was removed from at least one item.
Invisible book with name "remove damnation":
Removes curse and damnation from all cursed or damned items, returns
if curse or damnation was removed from at least one item.
Invisible book with name "heal depletion":
Removes all depletion effects and returns unless the follower's stats
were not depleted.
Invisible book with name "voice_behind":
The follower hears a voice from behind. item->msg is what the voice
says. Always returns.
Invisible book with name "message":
The follower receives item->msg as a simple message. Always returns.
Invisible book with name "enchant weapon":
The follower's weapon is enchanted in various ways. item->level
affects how much the weapon is enchanted, higher value means less
enchantment.
Invisible spellbooks:
If the prayer in the book is not yet known to the follower, and the
follower has the required level, teaches the prayer to the follower
and returns. The prayer is determined by item's slaying field.
Visible spellbooks:
If the prayer in the book is not yet known to the follower, the
follower has the required level, and the follower doesn't already have
a spellbook with that prayer, gives a copy of this spellbook to the
follower and returns. The item must have FLAG_STARTEQUIP. The prayer
is determined by item's slaying field.
Other visible items:
If the follower doesn't already have this or a similar item (with same
type, name, title, msg and slaying fields), gives a copy of this item
to the follower. You have to set FLAG_STARTEQUIP in the archetype
yourself if you wan't the copy to have this flag. This method (with
FLAG_STARTEQUIP set) should be prefered for giving items to followers,
because it is rather safe to use. The amount is limited, because if
the follower wants more of it he has to go back to an altar of his
god. He can't pray an hour over an altar and then go fighting with a
hundred potions of restoration.
Other invisible items:
If the follower doesn't already have it this item, gives it, similar
to visible items. Except, it ALWAYS gives it, upon conversion.
And on conversion to another religion, it is ALWAYS removed.
Signs and forces and skills may not be given/taken this way.
====== Misc change description: ======
The following area describes various comments about various pieces of
code. In general, the information describes a basic idea of how things
work. The following may not really be necessary, but I figure that it is
probably worth saving, and this seemed to be as good as place as any.
LIGHTING CODE (by Brian Thomas):
- fast calculation of lighting. For players los (line- of
sight)is calculated from a linked list of nearby lights.
For monsters, no los is calculated, rather a modified
check_wakeup routine is used to see if they will
follow/attack players. Monsters with can_see_in_dark act
normally in dark areas.
- New attacktype -AT_BLIND. This is a pretty severe penalty
for monsters and players alike. Players cant see any square
but thier own, monsters can only attack/follow players who
are in an adjacent square. Need to make the monsters stumble
around when no player is near, rather than the current way
in which they stand around waiting to get "ace'd". Undead
cannot be blinded, nor should be effected by darkness. For
other monsters, if they have immunity to blindness or can
see invisible, they are uneffected by AT_BLIND attacks.
- New spells. Some magician, some clerical. They work, but
may need to be adjusted for playbalance. Normal spells
available include: "light", "darkness", "sunspear", "faery
fire" and "dark vision". All spells (but darkvision) work
(do something) whether the lighting code is used or not.
- Modified archetypes and artifacts list to encompass changes
to the code from lighting. Also, some new archs instroduced,
namely "flint and steel" for lighting stuff on fire and
"torch" a source of light.
====== How to add new values ======
This section details how to add new fields/flags to an object structure.
1) Send mail to the development list to make sure that a new element is really
added.
For flags:
2) Update the FLAG_.. entries in include/define.h for your new flag. Recycle unused
values if possible - there may be cases where you want to group the new flags together.
If you are adding beyond the end of the existing values, update the NUM_FLAGS entry
3) Decide the name of your flag as loaded/saved in objects. The default syntax is
the name you assigned in step 2 above, minus the leading flag_ part.
4) In the common/loader.l, update the load section (where the code is mostly ^value
SET_OR_CLEAR(...)) add your entries in.
5) update the flag_names in common/loader.l. The location of your names _must_ be
in the same array location as the FLAG_ value.
6) Update other areas of the code that you presumably know about that will use these
flag values.
7) As appropriate, update the arch files and rebuild.
====== PROGRAMMING NOTES ======
This section provides some specific programming notes about objects. If
you don't actually work with the C code, there is no need to read this section.
Basically, all the char* pointers in the object structure use a shared
string library. Using shared strings saves memory and improved performance.
To use the share string library, it is as simple as calling add_string(char
*cp), where *cp is the pointer to the string you want to add. You can pass
defined strings also. The function the finds the string, if it exists,
increases the referecne count, and returns a pointer to the existing string.
If the string does not exist in the table, it allocates space for it, copies
the data into the space, and returns that new pointer.
free_string should be called to free these strings.
strdup and free should never be used on these shared strings.
When copying objects, the copy_object routine should always be used. It will
add reference counts to the copied strings.
Because shared strings will return a pointer to a string if it
exists, one can see if the strings are equal by comparing the shared
string address they point to.
Shared string data should never be modified by any means - eg,
strcpy(op->name, "new value") will update all the objects that use the same
shared string as op does for its name. Even without shared strings, this
should never be done, because you can not be sure of the space allocation for
op->name is long enough.
IP-Address : 213.174.127.3
Old Revision: none
New Revision: http://wiki.metalforge.net/doku.php/dev:objects
--
This mail was generated by DokuWiki at
http://wiki.metalforge.net/
More information about the crossfire-wiki
mailing list