[Crossfire-wiki] [Crossfire DokuWiki] page changed: linux

[no-reply_wiki at metalforge.org]

A page in your DokuWiki was added or changed. Here are the details:

Date        : 2007/06/29 00:25
User        : leaf
Edit Summary: More info for Fedora - server start, stop, restart

@@ -134,8 +134,20 @@
  
    $ sudo yum update;sudo yum install crossfire.i386 
  
  This will install the Crossfire server and the current map set.  For those using a 64bit system, you need to replace i386 with x86_64 (for instance, crossfire.x86_64)
+ 
+ If necessary, you can stop, start or restart the crossfire server via the following commands, respectively:
+ 
+   $ /etc/init.d/crossfire stop
+ 
+   $ /etc/init.d/crossfire start
+ 
+   $ /etc/init.d/crossfire restart
+ 
+ Again, adding sudo to those commands may be necessary.  For example:
+ 
+   $ sudo /etc/init.d/crossfire restart
  
  === Client ===
  
  Installation of the client has a similar syntax. 


IP-Address  : 65.165.40.73
Old Revision: http://wiki.metalforge.net/doku.php/linux?rev=1183092465
New Revision: http://wiki.metalforge.net/doku.php/linux

-- 
This mail was generated by DokuWiki at
http://wiki.metalforge.net/